남주석 교수 .

남주석 교수

남주석

남주석교수

학력
  • 2007.2서울대학교 (공학사 – 바이오시스템공학전공)
  • 2009.2 서울대학교 (공학석사 – 바이오시스템공학전공)
  • 2014.8 서울대학교 (공학박사 – 바이오시스템공학전공)
주요경력
  • 2009.2 ~ 2009.12한국기계연구원 인턴
  • 2010.11 ~ 2014.8한국기계연구원 위촉연구생
  • 2014.9 ~ 2015.2전북대학교 시간강사
  • 2014.9 ~ 2016.2한국기계연구원 박사후 연구원
  • 2016.3 ~ 강원대학교 바이오시스템공학과 조교수
전문분야
  • 트랙터 및 농작업기계 동력장치 설계 및 해석
  • 트랙터 및 농작업기계 구조 설계 및 해석
  • 필드시험을 통한 설계 검증
  • 성능 및 피로시험 기술
논문
  • "Consumed-Power and Load Characteristics of a Tillage Operation in an Upland Field in Republic of Korea",바이오시스템공학,한국농업기계학회 ,한국산업기술평가관리원,2018-06,,제43권,제2호,83~93
  • "Performance Analysis for a Card Cleaner Type Separating System of Pepper Harvester",Journal of the Faculty of Agriculture Kyushu University,Kyushu University,,2018-02,,제63권,제1호,103~111
  • "Factorial Experiment for Drum-type Secondary Separating Part of Self-propelled Pepper Harvester",바이오시스템공학,The Korean Society for Agricultural Machinery,,2017-12,,제42권,제4호,242~250
  • "롤러식 양파 파종기의 작동 특성 분석",농업생명과학연구,경상대학교 농업생명과학연구원,농림수산식품기술기획평가원,2017-12,,제51권,제6호,145~158
  • "Analysis of Spray Characteristics of Tractor-mounted Boom Sprayer for Precise Spraying",바이오시스템공학,The Korean Society for Agricultural Machinery,,2017-12,,제42권,제4호,258~264
  • "물 직분사를 이용한 복숭아 적뢰·적화작업 생력화 시스템의 성능 시험",농업생명과학연구,경상대학교 농업생명과학연구원,,2017-08,,제51권,제4호,161~170
  • "Development of a Rotary Clap Mechanism for Positive-Displacement Rotary Pumps: Experimental Verification and Optimization",INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,한국정밀공학회,,2017-04,,제18권,제4호,587~597
  • "Development of a Rotary Clap Mechanism for Positive-Displacement Rotary Pumps: Pump Performance Analysis",INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,한국정밀공학회,,2017-04,,제18권,제4호,575~585
  • "풍력발전기용 3점 지지 기어박스의 토크암 핀 및 탄성중합체 부싱 설계",한국생산제조시스템학회지,한국생산제조시스템학회지,,2017-04,,제26권,제2호,199~204
  • "Experimental Study on the Structural Safety of the Tractor Front-End Loader Against Impact Load",바이오시스템공학,The Korean Society for Agricultural Machinery,,2016-09,,제41권,제3호,153~160
  • "풍력발전기용 3점 지지 기어박스에서 캐리어 핀홀 위치 오차가 유성기어의하중분할에 미치는 정성적 영향에 관한 실험적 연구",한국생산제조시스템학회지,한국생산제조시스템학회지,,2016-04,,제25권,제2호,97~104
  • "Development of a gearbox test rig with non-torque loading capacity",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2016-04,,제30권,제4호,1713~1722
  • "The effects of non-torque loads on a three-point suspension gearbox for wind turbines",International Journal of Energy Research,WILEY-BLACKWELL,,2016-04,,제40권,,618~631
  • "Design Parameter Optimization for Tillage Blade of Crank-type Rotavators considering Strength and Weight",Journal of the Faculty of Agriculture Kyushu University,Kyushu University,,2016-02,,제61권,제1호,165~172
  • "Dynamic life prediction of pitch and yaw bearings for wind turbine",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2016-01,,제30권,제1호,249~256
  • "풍력발전기용 3점 지지 드라이브 트레인의 지지 강성이 기어박스 입력하중에 미치는 영향",한국생산제조시스템학회지,한국생산제조시스템학회지,,2015-10,,제24권,제5호,514~520
  • "메인 베어링 강성이 풍력발전기용 3점 지지 드라이브 트레인의 기어박스에 미치는 영향",한국생산제조시스템학회지,한국생산제조시스템학회지,,2015-06,,제24권,제3호,278~286
  • "풍력타워의 형상이 수직축 풍력터빈의 성능에 미치는 영향에 관한 수치적 연구",신재생에너지,한국신재생에너지학회,,2015-06,,제11권,제2호,17~28
  • "풍력발전기용 피치/요 베어링의 시험절차 개발",한국생산제조시스템학회지,한국생산제조시스템학회지,,2015-06,,제24권,제3호,355~362
  • "An experimental study on the performance and fatigue life of pitch bearing for wind turbine",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2015-05,,제29권,제5호,1963~1971
  • "Application of similarity theory to load capacity of gearboxes",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2014-08,,제28권,,3033~3040
  • "Development of highly reproducible test rig for pitch and yaw bearings of wind turbine",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2014-02,,제28권,,705~712
  • "Optimal Design of Wind Turbine Gearbox using Helix Modification",Engineering in Agriculture, Environment and Food,Asian Agricultural and Biological Engineering Association,,2013-10,,,,~
  • "Analysis of the Tillage and Power Consumption Characteristics of a Crank-type Rotavator according to the Tillage Blade Shape",Journal of the Faculty of Agriculture Kyushu University,Kyushu University,,2013-09,,제58권,,319~328
  • "Comparison of Tillage and Loads Characteristics of Three Types of Rotavators: Rotary-type, Crank-type, and Plow-type",바이오시스템공학,The Korean Society for Agricultural Machinery,,2013-06,,제38권,제2호,73~80
  • "A new accelerated zero-failure test model for rolling bearings under elevated temperature conditions",JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,,2013-06,,제27권,,1801~1807
  • "Tillage Characteristics Estimation of Crank-type and Rotary-type Rotavators by Motion Analysis of Tillage Blades",바이오시스템공학,The Korean Society for Agricultural Machinery,,2012-10,,제37권,제5호,279~286
  • "Comparison of Work Performance of Crank-type and Rotary-type Rotavators in Korean Farmland Conditions",바이오시스템공학,The Korean Society for Agricultural Machinery,,2012-06,,제37권,제3호,140~147
  • "Determination of rating cone index using wheel sinkage and slip",JOURNAL OF TERRAMECHANICS,PERGAMON-ELSEVIER SCIENCE LTD,,2010-08,,제47권,,243~248
학회참가
  • 한국농업기계학회 2016년도 춘계학술대회",풍력발전기용 3점 지지 기어박스의 토크암 핀 설계(주저자(제1저자)),한국농업기계학회,2016-04-29~2016-04-29
  • "International Joint Symposium between Korea and Japan",Current Status and Prospects of Mechanization for Onion Port-Seeding in South Korea(주저자(교신저자)),충남대학교,2016-11-09~2016-11-09
  • "한국농업기계학회 추계학술대회",양파 파종의 기계화율 향상을 위한 포트파종기 개선설계 방안(주저자(교신저자)),한국농업기계학회 ,2016-11-03~2016-11-03
  • "International Joint Symposium between Korea and Japan",Current Status and Prospects of Onion Production in South Korea(주저자(교신저자)),충남대학교,2016-11-09~2016-11-09
  • "한국농업기계학회 추계학술대회",자동차용 자동 변속기 시험 장비의 개념 설계(주저자(교신저자)),한국농업기계학회,2016-11-03~2016-11-03
  • "2017년 한국원예학회 춘계학술대회",복숭아 적뢰 · 적화작업의 생력화를 위한 물 직분사 시스템 개발(공저자),한국원예학회,2017-05-26~2017-05-26
  • "2017 International Conference on Engineering and Natural Science - Summer Session",Dynamic Simulation of Roller-Type Onion Pot-Seeding Machine for Optimization of Roller Length(주저자(교신저자)),International Business Academics Consortium,2017-08-23~2017-08-25
  • "2017년도 대한기계학회 IT융합부문 춘계학술대회",궤도시스템을 갖는 모바일 크러셔의 유연체 모델 적용 사행 특성 연구(공저자),대한기계학회,2017-05-11~2017-07-11
  • "한국농업기계학회/농업생산무인자동화연구센터 2017추계공동학술대회",롤러식 포트파종기의 관수장치 개발(주저자(교신저자)),한국농업기계학회농림수산식품기술기획평가원,2017-10-27~2017-10-27
  • "한국농업기계학회/농업생산무인자동화연구센터 2017추계공동학술대회",아스파라거스 수확용 작업차의 개선설계 방안(주저자(교신저자)),한국농업기계학회농림수산식품기술기획평가원,2017-10-27~2017-10-27
  • "한국농업기계학회/밭농업기계개발연구센터 2017년 춘계 공동학술대회",롤러식 양파 파종기의 동적 시뮬레이션(주저자(교신저자)),한국농업기계학회,2017-04-06~2017-04-06
  • "한국농업기계학회/농업생산무인자동화연구센터 2017추계공동학술대회",상업용 붐 방제기의 분무 특성 평가(공저자),한국농업기계학회한국산업기술평가관리원,2017-10-27~2017-10-27
  • "한국농업기계학회/밭농업기계개발연구센터 2017년 춘계공동학술대회",국내 감자 재배 농민들의 트랙터 작업기 사용 실태조사(공저자),한국농업기계학회,2017-04-06~2017-04-07
  • "International Symposium on Agricultural, Food, Environmental and Life Sciences in Asia, 2017 (The 14th International Joint Symposium between Japan and Korea)",Evaluation of spraying characteristics for a commercial boom sprayer(공저자),Faculty of Agriculture, Kyushu University,2017-11-08~2017-11-08
  • "International Symposium on Agricultural, Food, Environmental and Life Sciences in Asia, 2017 (The 14th International Joint Symposium between Japan and Korea)",Optimization roller parameter for improving design of roller-type pot seeding machine(주저자(교신저자)),Faculty of Agriculture, Kyushu University 농림식품기술기획평가원,2017-11-09~2017-11-09
  • "The 9th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB2018)",,Korean Society for Agricultural Machinery,2018-05-29~2018-05-29
  • "The 9th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB2018)",Development of Irrigation System for Roller-Type Onion Pot-Seeding Machine(주저자(교신저자)),Korean Society for Agricultural Machinery농림수산식품기술기획평가원,한국연구재단(EZBARO),,2018-05-29~2018-05-29
  • "The 9th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB2018)",Analysis of Transplanting Device of a Commercial Vegetable Transplanter(주저자(교신저자)),Korean Society for Agricultural Machinery한국연구재단(EZBARO),2018-05-29~2018-05-29
  • "The 9th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB2018)",Flow Control Method of Tractor-mounted Boom Sprayer for Precision Spraying(공저자),Korean Society for Agricultural Machinery한국산업기술평가관리원,2018-05-28~2018-05-28
지식재산권(출원)
  • 외 1명, "관수장치가 구비된 롤러타입 양파 파종기",,대한민국,10-2017-0138564,농림수산식품기술기획평가원,2017-10-24,,